当前位置:首页 > 产品首页 >温度控制器>KS 41-1

温度控制器KS 41-1

  • Horizontal form factor. 48mm high x 96mm wide
  • BluePort® Front interface and BlueControl Software
  • Maintenance manager and error list
  • Automatic/Manual key
  • Monitoring of heating current and input circuit
  • Timer and programmer
  • Extended limit signalling function with latch
  • Type tested to EN 14597 (replaces DIN 3440), cULus and GL

The universal temperature controller KS 41-1 is intended for universal, precise, and cost-effective control tasks in all branches of industry. For this, the unit provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external setpoint input.

The KS 41-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter.

Product Category: Single Loop Controller
Dimensions and size: 48m x 96mm x 118mm (HxWxD), 1/8 DIN Horizontal
Connectors: Pin or screw terminals
Primary Input Type: Universal (TC, RTD, DC linear mA/mV)
Other Inputs: External setpoint, Heating current monitoring
Output Type: Relay, Logic, Linear mA/VDC
Max. Number of Outputs: 3
Scan Time: 100 ms
Control Type: 2-point (on/off), continuous PID control, or 3-point stepping
Number of Programmer Segments: 4
Power Supply: 90-260 VAC, 20,4-26,4 VAC: Frequency 48-62 Hz,
18-31 V DC
Communications: Modbus RS422/485
Panel Sealing: IP65
Certifications: CE, cULus, GL, GOST-R
Software Tools: BlueControl
  • KS 41-1 订购指南